Selta Netfon 300 - Customizing the Language

User operations
NETfon 300/350 - User Guide 723142003-A0-LM
43
10. <Save the changes?> to save press enter , to cancel press ESC .
8.1.6. Customizing the language
Change the language of the screen in the following way:
1. press menu/enter buttons
2. scroll the menu up to USER SETTINGS
3. press enter
4. scroll the menu up to LANGUAGE
5. the language in use is displayed, to choose the new language scroll the list
6. to confirm press enter
7. to exit the menu press ESC
8. <Save the changes?> to save press enter , to cancel press ESC .
8.1.7. Customizing call ring pattern
Change the ring pattern (flash-only, ring once, beep-only, etc.) in the following way:
1. press menu/enter buttons
2. scroll the menu up to PROFILES
3. press enter
4. choose one of the three options GENERAL - MEETING - SILENT (*)
5. to confirm press enter
6. to exit the menu press ESC or wait until the timer elapses
(*)
General
It is the default ring pattern and does not change the ring set up by the user.
Meeting
It makes the ringer last only 2 seconds.
Silent
The ringer is off, the incoming call is signalled by the led flashing blue.
8.1.8. Adjusting handset, headset, speakerphone and ringer volume
Adjust the volume in the following way:
1. press menu/enter buttons
2. scroll the menu up to USER SETTINGS
3. press enter
4. choose one of the options: HANDSET VOLUME / SPEAKER VOLUME / RINGER VOLUME /
HEADSET VOLUME
5. press enter