54 SAE
fon
- operating instructions
The trunk lines are all engaged. How to book a line
After hearing the engaged tone, enter the
“automatic call back” code and
replace the handset.
As soon as the trunk line is free, the telephone
will ring continuously with three short squeals:
lift the handset and dial the desired number.
How to store a trunk line number and repeat it
Upon finishing a trunk line conversation, you
decide to store the dialled number.
Before hanging-up, enter the “store number
dialled” code .
When you want to repeat the stored number,
lift the handset and enter the “repeat
last trunk number stored” code .
How to continue using the trunk line at the end of a conversation without
hanging-up
Before replacing handset dial the “immediate
re-seizure of previously seized trunk line”
code and upon hearing the trunk
dialling tone, dial the desired number
To Next Page
Loading...
