62 SAE
fon
- operating instructions
How to execute an internal data call
Press the “data call” function key; the led next
to the key will start to flash.
Dial the number of the data user; the led next
to the “data call” function key has one of the
following states:
flashing at fast rate = user engaged;
flashing at slow rate = connection being set-
up;
continuously alight = connection established.
If you want call a pre-defined user, press only
To utilize the data services (only with the SAEfon TK) it is necessary to
programm two function keys:
DTCALL (data call feature)
V/D SW (voice/data call feature)
Before using these services, it is necessary to associate the telephone
with the data call feature, pressing the “V/D SW” key; the led next to the
key will be continuously alight.
Engaged internal data extension. How to be recalled as soon it is free
Upon receiving the indication that the called is
engaged, dial the “automatic callback”
code .
Press the “data call” function key, the led next
to the key will be extinguished.
DATA CALLS
To Next Page
Loading...
