Selta SAEfon - Connecting SAEfon TK and K Module; Programmable Key Labeling

SAE
fon
- operating instructions 73
Lamps test
To start the lamps test:
- press the VOLUME - and DIGIT * keys simultaneously;
- during the lamps test, all the lamps associated with the function keys will be
continuously alights.
To exit press any key.
Keyboard test
To control the correct functioning of the telephone’s keyboard:
- press the VOLUME - and DIGIT 0 keys simultaneously;
To execute the test, press innumerical order the keys from KY01 to KY16, the
digits from 1 to 9, the digit *, 0 and #, VOLUME + and VOLUME - and the 24
keys of the K module.
In the case of a wrong manoeuvre or keyboard failure, the test is stopped.
Ringer cadence
To modify the cadence of the ringer:
- press the VOLUME - and DIGIT # keys simultaneously;
- press the DIGIT for the desired option indicated below:
INTERNAL CALL DIGIT 1
EXTERNAL CALL DIGIT 2
CALL BACK DIGIT 3
- press the DIGIT for the desired option indicated below:
CADENCE 1 - CADENCE 9 DIGIT 1 - DIGIT 9
Reset set up
To reinizialize the telephone’s EEPROM with its default values:
- press the VOLUME - and DIGIT 7 keys simultaneously;
- press the DIGIT for the desired option indicated below:
UNDO DIGIT 0
CANC DIGIT 1
- press the “#” key to confirm.