Main features
In use led indicator
The IN USE LED, red colour, will be turned on during the handset is off-hook.
Message indicator
This indicator blinks during incoming call or signal waiting messages.
Phone Setting
Tone/Pulse dialing mode select
Select Tone or Pulse mode by using the slide switch (21) on the Base Unit.
Tone or Pulse Dialing depend on your local Telephone Exchange. Contact
your local Telephone Office or your company PABX administrator if you need
help.
Volume Control during conversation
During telephone conversation, if you want to adjust the receiving volume,
press [ + or - ] key to increase/decrease the volume during off-hook state.
The receiving volume will resume to default level after hanging up the phone.
Level Volume
1 Extra high
2 High
3 Medium-high
4 (Default) Medium
5 Medium-low
6 Low
To Next Page
Loading...