Programming ringer tone and volume
The ringer tone and volume can be programmed as follows:
1. Pick up the handset
2. Press PROGRAM (12) button and led (13) will blink
3. Press "#" button
4. Press digits from 0, 1 to 9 to select different ringer tone and volume. The
combination is described in the following table:
Digit Tone Volume
1 Long pitch Low
2 Long pitch Medium
3 Long pitch High
4 Medium pitch Low
5 Medium pitch Medium
6 (Default) Medium pitch High
7 Short pitch Low
8 Short pitch Medium
9 Short pitch High
0 (Temporary setting) None Off
5. Press PROGRAM (12) button to complete the programming and the led
(13) will turn on steady.
REMARKS:
a) The default setting of your phone is digit [6].
b) If digit [0 - zero] is programmed, the ringer will be turned off. When you pick
up the handset, the ringer will resume to the last setting.
To Next Page
Loading...
