SELVA MARINE Antibes Series User Manual

21
STEERING CONTROL DEVICE MOUNTING
Insert the control cable in the tube brackets union.
Fix one extremity of the longitudinal rod of control of the steering to the
steering fixation plate, using the apposite nut, bolt and washer. Then fix
the other extremity of the rod to the cable of control through the nut and
the washers.
Insert the sheet-retainer 2 in the control cable. Insert the cable in the tube
brackets union, then on the cable itself and then the washer 4 and the ring
5. Stop the sheet in the bracket tube screwing the rings 2 and 5 completely
(see the positions of the bolts shown in the picture).
Picture No. 47
1 Control cable
2 Ring
3 Tube bracket union
4 Washer
5 Ring nut
6 Control cable end
7 Steering link arm kit
8 Steering plate
A Steering plate
B Steering arm kit
C Control cable end
Picture No.47
https://www.boat-manuals.com/

SELVA MARINE Antibes Series Specifications

General

Brand	SELVA MARINE
Model	Antibes Series
Category	Engine
Language	English