SEM Model 0205 EMD E-Media Destroyer
13
508.366.1488 | www.semshred.com
4.) Maintenance
4.1 Waste Bin Full
If the unit becomes full of waste, the FULL indicator will appear. The waste bin bag should now be removed and
install a new bag.
4.2 Overheat Sensor
The unit is equipped with a thermal switch for safety to ensure that the motor does not overheat. If the unit is run
continuously for longer than one hour, at some point the switch will engage and disallow the unit to activate until
the temperature has dropped to safe levels. If this occurs, the HOT indicator will appear and the user must wait for
it to automatically reset.
4.3 Service Needed Symbol
If the unit encounters many errors or an unsafe condition is detected, the SERVICE NEEDED screen and symbol is
displayed. If this occurs, please contact SEM customer support.
To Next Page
Loading...
