SAFETY FUNCTIONS Cont…
Alarm and Beep
(1) Acceptance Beep
It sounds on acceptance of key entry and when the machine status changes
The beep sounds intermittently every 5 seconds when paper
or foreign articles are detected near the feed opening while
the shredder stops and the screen shown on the left is displayed.
Note: If this status lasts for more than 3 minutes, the
machine locks up temporarily and Error 1 is displayed.
(3) Status Information Beep
In the following occasions, the information beep sounds to notify the status
change.
When the shredder starts evening out the waste chips
After detecting that the waste basket is full.
(2) Alarm
When the auto-cut function is activated and when the
machine restores itself.
When an error is generated;
Note: for details of errors refer to page
For NATIONWIDE SERVICE call 1(800)225-9293
11
SHRED RUNS BY
START
KEY
PRESS
LEVELING
OFF
WASTE
CHIPS
~
0
fA]
Icons light
lbd
l!dI
up
by
tums
W>
WAIT:
COOLING
[):)
OFF MOTOR
ml
~
~
~
Icons light
~
~
upbytums
IERROR 1
READ MANUAL
https://www.supplychimp.com
To Next Page
Loading...
