508.366.1488 | www.semshred.com
Changing the Screen
1. Unplug the power cord from the wall receptacle.
2. Remove screw from the combination transition using a 7/16” wrench.
3. Remove the four nuts & lock washers from under screen using a ½” deep socket.
4. Lower the Screen.
5. Insert the new screen and re-tighten the nuts.
6. Plug the power cord back into the receptacle.
Recommended Spare/Optional Items Available
Standard Knives (4R/2B) P/N: 390250K
Perforated Screen 5/64” Dia. Holes P/N: 343250SCR564
Perforated Screen 3/32” Dia. Holes P/N: 343250SCR18
Vacuum Bags (3) Pack – 230V P/N: 75060295A-3A
Note: For 230V units prior to Dec 2019, contact SEM for vacuum bags for your serial number.
To Next Page
Loading...
