15
7 Accessories
Rollers:
Your landscaping machine comes with planed pressure rollers as standard equipment. As a special
optional accessory for all our landscaping machines, delivery can also include lattice rollers as pre-
rollers and/or pressure rollers instead of the planed rollers.
Tarpaulin cover:
Tarps made from high-quality weather-proof plastic tarpaulin for protecting your landscaping machine.
Seed dibbler for golf course greens:
Models RS 60 N, RS 80 N and RS 100 N can be equipped with special seed dibblers for seeding golf
course greens. These golf dibblers have considerably more spikes and are ideally-suited for working
the lawn seed into the substrate areas of the greens. Exchanging dibbler rollers is a quick and virtually
effortless process.
Studding equipment:
Our studding device takes the form of a perforated roller in place of the front roller and is an
economical auxiliary unit for our RS 60 N and RS 80 N models when reseeding lawns in need of
restoration. The uniform punched pattern of approximately 1200 cuts/m² produces excellent results
when reseeding.
Fertilizer spreader:
A fertilizer spreader is available as an accessory for all three working widths of the landscaping
machine. Mounting is an uncomplicated and virtually effortless process.
The fertilizer spreader frame is fit into the machine frame profile tubing openings and affixed with two
screws. After mounting the V-belt drive pulley on the pressure roller, the V-belt is tensioned with a
tensioning idler. Afterwards, mount the belt guard cover! To provide balance, a counterweight frame is
inserted into the front profile tubing openings of the machine frame and fastened with two screws.
A counterweight corresponding to each respective machine model is part of each delivery.
Mounting the fertilizer spreader on the RS 60 N / RS 80 N / RS 100 N
1. Secure machine handlebar in the mounting’s second 4. Insert counterweight frame into the profile tubing
hole from the top. openings and tighten.
2. Insert fertilizer spreader into the profile tubing openings 5. Slide the V-belt pulley over the hub of the
and tighten. agitator drive pulley and tighten.
3. Screw belt tightener onto the fertilizer spreader mounting
and tension the belt.
To Next Page
Loading...