Sempomp TKF-K Series - Spare Parts and Failure Analysis; Spare Parts Ordering Information; Common Failures and Possible Reasons

SPARE PARTS
- SEMPOMP warrants to provide the spare parts for TKF-K Series pumps for 5(five)
years beginning from production date. You can always easily obtain the spare parts
you need.
- In spare parts order, it will be sufficient for you to inform the following values which
are written in pump nameplate.
Pump Type : TKF-K 80/200
Motor Power(P) and Revolution(n) : 30 kW - 2900 d/d
Production Year and Serial No : 12/2011 - 201112-001
Flow rate(Q) and Manometric Height (Hm): 125 m³/h - 97 mSS
REASONS FOR FAILURES AND TROUBLE SHOOTING
In this chapter failures which can be seen in TKF-K type pumps, possible reasons
(Table 3) and trouble shooting methods (Table 4) are given.
ATTENTION! Control the accuracy of all measurement gauges before starting to
eliminate the failure operation.
Table 3
20
FAILURES
POSSIBLE REASONS
Started pumps never discharges liquid
3-6-8-12-11-14
Flow rate decreases or no liquid is discharged
4-2-7-15
Motor is overloading
9-10-16-17-21-28-27
Bearings have over temperature
21-19-20-22-26
There is vibration in pump
13-18-21-25-23
Noise level is high
1-5-24