EasyManua.ls Logo

Sempomp TKF-K Series - Pump Handling and Transportation; General Carrying Safety Guidelines; Loading, Unloading, and Lifting Procedures

Sempomp TKF-K Series
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CARRYING
General Warnings
Absolutely obey the following rules during transportation.
- Use proper wooden crane, forklift, or hoisting mechanisms for unloading or loading
wooden cases, packages, boxes and palettes depending on their weight and volume.
- Wear gloves, hard tip shoes and helmet during carrying works.
- Never stay under hoisting mechanism while loading or unloading pumps.
Pump and Motor Group Loading/Unloading
Before loading/unloading pump group please determined the following properties.
- Please find the lifting points.
- Please consider total weight and centre of gravity.
- Please consider the packaging external dimensions
- During loading/unloading make accelerating and braking operations as it shall not
cause any damage for working personnel.
- Load lifting capacity should be suitable with pump and pump group weight.
- You should never stay under or near lifted load.
- Pump should be hoisted as it is indicated in Figure 1-1 and Figure 1-2 for not
causing any damage in pumps. Motor hanging ring should absolutely not be used
while lifting complete group.
- Load should be kept in lifted position more than required time.
- Pump and pump group should always be lifted and carried in horizontal position
5