Page 6 of 12
Semtech
Wireless & Sensing Products
User Guide for the SX1261 and SX1262 Development Kits Rev 1.1
UG.DEV.SX126x.W.APP March 2018
2.4 Check and Upload the Firmware File
Before using the SX1261/SX1262 Development Kit, make sure to have the latest firmware:
- Go to the Utilities
section 7
- Check the Firmware Version
- If it is not the latest version, download the firmware from
www.semtech.com
and save it to your PC
The firmware can then be uploaded to the SX1261/SX1262 Development Kit.
To upload the firmware file:
- Connect the SX1261/SX1262 Development Kit as explained in
Section 2
- Allow your computer to display the kit as an extra device
- Drag and drop the .bin file that has been provided to you or that has been downloaded from the Semtech
website
- The kit will initialize and eventually ask you to calibrate the screen, simply follow the on-screen instructions
To Next Page
Loading...
