50S Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 10
2 INSTALLING THE HEADSET ON YOUR HELMET
2. Remove the back plate.
3. Remove the rubber pad and replace it with the thicker rubber pad
included in the package.
4. Hook on the adapter to the clamp unit then screw in the glued
external adapter to the clamp unit.
5. Reconnect the speaker cable to the speaker port.
1
2
6. Locate a proper surface on the helmet to attach the unit then clean
the helmet surface location with a moistened towel and allow it to dry
thoroughly.
7. Peel off the cover of the adhesive tape of the adapter and attach the
unit on the proper surface of your helmet.
To Next Page
Loading...
