Sena 50S - Switching the Microphone

50S Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 11
2 INSTALLING THE HEADSET ON YOUR HELMET
2.3 Switching the Microphone
If you want to use a different microphone instead of the static boom
microphone, please refer to the following steps.
1. Remove the back plate of the clamp unit.
2. Connect the microphone according to your helmet type.
3. Lock the microphone to the clamp.
4. Reattach the back plate to cover the microphone and the speaker
port.
Speaker Port
Microphone Port
2.3.1 Wired Boom Microphone
When installing the included wired boom microphone, place the hook
and loop fastener at the end of the boom microphone between the
internal helmet cheek pad and the internal wall of the helmet shell.
The boom microphone should be mounted so it is facing close to your
mouth when you wear the helmet.