50S Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 17
4. PAIRING THE HEADSET WITH OTHER
BLUETOOTH DEVICES
When using the headset with other Bluetooth devices for the first time,
they will need to be “paired.” This enables them to recognize and
communicate with one another whenever they are within range.
The headset can pair with multiple Bluetooth devices such as a mobile
phone or GPS via Mobile Phone Pairing, Second Mobile Phone
Pairing and GPS Pairing. The headset can also be paired with up to
three other Sena headsets.
Pairs with up to Three Sena Headsets
4.1 Phone Pairing
There are three ways to pair the phone.
4.1.1 Initially Pairing the 50S
The headset will automatically enter the phone pairing mode when you
initially turn on the headset or in the following situation:
• Rebooting after executing Factory Reset; or
• Rebooting after executing Delete All Pairings.
1. Press and hold the Phone Button and the Jog Dial for 1 second.
=
P
1s
HOLD
Blinking
“Phone pairing”
CHAPTER
To Next Page
Loading...
