Sena 50S - Pairing When 50 S is Turned Off

50S Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 18
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
2. Select 50S in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
50S
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Phone Button or the Jog Dial.
4.1.2 Pairing When the 50S is Turned Off
1. While the headset is off, press and hold the Phone Button and the
Jog Dial until the LED flashes red and blue alternately and you hear a
voice prompt, “Phone pairing.”
=
P
HOLD
Blinking
“Phone pairing”
2. Select 50S in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
50S