Sena 50S - Pairing When 50 S is Turned On; Second Mobile Phone Pairing

50S Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 19
4 PAIRING THE HEADSET WITH OTHER BLUETOOTH DEVICES
4.1.3 Pairing When the 50S is Turned On
1. While the headset is on, press and hold the Phone Button for
5 seconds.
=
P
5s
HOLD
Blinking
“Phone pairing”
2. Select 50S in the list of Bluetooth
devices detected. If your mobile
phone asks for a PIN, enter 0000.
Device B
Pi
Bluetooth
50S
4.2 Second Mobile Phone Pairing
1. Press and hold the Jog Dial for 5 seconds.
5s
HOLD
Blinking
“Intercom pairing”
2. Tap the Phone Button.
=
P
1x
TAP
Blinking
“Second mobile
phone pairing”