Sena 50S - Delete All Pairings; Software Configuration Setting; Channel Setting

50S Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 60
14 CONFIGURATION SETTING
14.1.1 Delete All Pairings
Delete All Bluetooth Pairing Information stored in the headset.
14.1.2 Remote Control Pairing
You can remotely control the headset using Sena Remote Control
devices (sold separately).
1. Turn on the headset and the Remote Control device.
2. Execute Remote Control Pairing.
3. Enter pairing mode in the Remote Control device. The headset will
automatically connect with the Remote Control device in pairing
mode.
14.2 Software Configuration Setting
You can change the settings of the headset through the Sena Device
Manager or the Sena Motorcycles App.
Sena Motorcycles Sena Device Manager
14.2.1 Speed Dial
Assign phone numbers for speed dialing to make a phone call quickly.
14.2.2 Channel Setting (Default: channel 1)
If the Open Mesh communication experiences interference because
other groups are also using the channel 1 (default), change the
channel. You can select one of 1 to 9 channels.
14.2.3 Headset Language
You can select the device language. The selected language is
maintained even when the headset is rebooted.