EasyManua.ls Logo

Sena 50S - Mesh Reach-Out Setting; VOX Phone

Sena 50S
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
50S Motorcycle Bluetooth
®
Communication System with Mesh Intercom™ | 61
14 CONFIGURATION SETTING
14.2.4 Mesh Reach-Out (Default: Disable)
When the Mesh Reach-Out is enabled, a Mesh Reach-Out request
message can be sent or received. If the Mesh Reach-Out is disabled, a
Mesh Reach-Out request message cannot be sent or received.
14.2.5 Audio Equalizer (Default: Music Balance)
Increase or decrease the decibel level of different frequency ranges of
audio.
Music Balance will adjust frequency response that gives the most
natural balance between lows, mids, and highs.
Music Enhanced will lower midrange frequencies slightly.
Voice will increase midrange frequencies of the human voice and cut
environmental noise for better clarity with voice communication.
Bass Boost will increase the bass range of audio (130 Hz and below).
Treble Boost will increase the high range of audio (6 kHz and above).
14.2.6 Audio Boost (Default: Enable)
Audio Boost increases the overall maximum volume. If Audio Boost is
enabled, Audio Equalizer will not be effective at the maximum volume
and only work below the maximum volume. If Audio Boost is disabled,
Audio Equalizer will work across all volume ranges.
14.2.7 VOX Phone (Default: Enable)
If this feature is enabled, you can answer incoming calls by voice. When
you hear a ringtone for an incoming call, you can answer the phone
by saying a word such as “Hello” loudly or by blowing air into the
microphone. VOX Phone is temporarily disabled if you are connected
to intercom. If this feature is disabled, you have to tap the Jog Dial or
the Phone Button to answer an incoming call.

Other manuals for Sena 50S

Related product manuals