Sena M1 Quick Start Guide

QUICK START GUIDE
Phone Pairing
There are three ways to pair the phone.
Initially Pairing the M1
The Bluetooth system will automatically enter the phone pairing mode
when you initially turn on the Bluetooth system or in the following
situation:
• Rebooting after executing Factory Reset
=
1s
HOLD
=
Alternating blue and red flashing lights indicate the device is
now discoverable. With your mobile phone in Bluetooth-pairing
mode, select M1 in the list of devices detected.
LED
STATUS
=
PIN
NUMBER
Note:
• The phone pairing mode lasts for 3 minutes.
• To cancel phone pairing, tap the Center Button.

Sena M1 Specifications

General

Gender	Unisex
Pattern	No pattern
Activity	Mountain biking
Material	Nylon, Polycarbonate (PC)
Coloration	Monochromatic
Finish type	Matt
Helmet type	Half helmet
Certification	CE, FCC, IC, CE EN 1078, CPSC 1203
Product color	Gray
Bluetooth range	900 m
Adjustable visor	Yes
Ventilation type	Fixed
Bluetooth version	4.1
Construction type	In-mold construction
Bluetooth profiles	A2DP, HFP, HSP, AVRCP
Hands-free calling	Keep your hands on wheel with Bluetooth™ Hands-free calling. After pairing your compatible Bluetooth mobile phone to your TomTom GPS, you’ll be able to see incoming call information, make and answer calls, and talk hands-free through your device. You’ll e
Helmet visor color	Black
Product main color	Black, Grey
Consumer life stage	Adult
Operating temperature (T-T)	-10 - 55 °C
Battery type	Built-in
Charging time	2.5 h
Battery life (max)	18 h

Weight and Dimensions

Weight	430 g