Sena OUTRUSH R - Pairing When the OUTRUSH R Is Turned off; Pairing When the OUTRUSH R Is Turned on

26
PAIRING THE BLUETOOTH SYSTEM WITH OTHER BLUETOOTH DEVICES
2. With your mobile phone in Bluetooth-pairing mode,
select Sena OUTRUSH R in the list of devices
detected.
3. If your mobile phone asks for a PIN, enter 0000.
Note:
•
The phone pairing mode lasts for 3 minutes.
•
To cancel phone pairing, tap the Center Button.
3.1.2 Pairing When the OUTRUSH R is Turned Off
1. While the Bluetooth system is off, press and hold the
Center Button and (+) Button for 5 seconds. You will
hear a voice prompt, “Phone pairing”.
2. With your mobile phone in Bluetooth-pairing mode,
select Sena OUTRUSH R in the list of devices
detected.
3. If your mobile phone asks for a PIN, enter 0000.
3.1.3 Pairing When the OUTRUSH R is Turned On
1. While the Bluetooth system is on, press and hold the
Center Button for 10 seconds. You will hear a voice
prompt, “Phone pairing”.
2. With your mobile phone in Bluetooth-pairing mode,
select Sena OUTRUSH R in the list of devices
detected.
3. If your mobile phone asks for a PIN, enter 0000.