Sena PS810 - UDP Statistics

88
6.6. UDP Statistics
The UDP Statistics screen provides statistical information about packets/connections using a UDP
protocol. Definitions and descriptions of each parameter are described below:
 InDatagrams :
Specifies the number of datagrams received.
 NoPorts :
Specifies the number of received datagrams that were discarded because the specified port was
invalid.
 InErrors :
Specifies the number of erroneous datagrams that were received. Datagrams Received Errors is the
number of received UDP datagrams that could not be delivered for reasons other than the lack of an
application at the destination port.
 OutDatagrams :
Specifies the number of datagrams transmitted.
Figure 6-6 UDP statistics