Sena R1 User Manual

1. Pair the mobile phone with the Bluetooth system.
2. Open the
Sena Utility App.
3. Click the Smart Intercom Pairing Menu.
4. Click the Add Button to open the QR scanning screen.
5. Scan the QR code displayed on your friend (B)’s mobile
phone.
• Your friend (B) can display the QR code on the
mobile phone by opening the
Sena Utility App and
clicking the Smart Intercom Pairing Menu.
6. Click the Confirm Button and check that your friend (B)
is paired with you (A) correctly.
7. Repeat steps 4-6 to pair with Intercom Friends (C) and
(D).
Note: The Smart Intercom Pairing (SIP) is not
compatible with Sena products that use Bluetooth 3.0
or below.
QUICK START GUIDE

Sena R1 Specifications

General

Integrated Intercom	Yes
Microphone	Built-in
Charging Time	3 hours
Operating Temperature	-10°C - 55°C (14°F - 131°F)
Compatibility	Works with most Bluetooth-enabled devices