Sena R2 EVO - Channel Setting for Mesh Intercom; Accessing Channel Setting Mode; Navigating and Saving Channels

Channel Setting (Default: channel 1)
You can select one of 1 to 9 channels.
①
Enter into the Channel Setting.
2x
TAP
“ Channel setting, 1”
②
Navigate between channels.
(1
2 ••• 8 9 Exit 1 •••)
1x
TAP
or
1x
TAP
“ #”
③
Save the channel.
1x
TAP
“ Channel is set,
channel #”
Note: You can use the Sena Cycling App to change the channel.