Using the Smart Intercom Pairing (SIP)
SIP allows you to quickly pair with your friends for intercom
communication by scanning the QR code on the Sena Cycling App
without remembering the button operation.
①
Pair the mobile phone with the Bluetooth system.
②
Open the Sena Cycling App and tap
(Smart Intercom Pairing
Menu).
③
Scan the QR code displayed on your friend (B)’s mobile phone.
• Your friend (B) can display the QR code on the mobile phone by
tapping
> QR code ( ) on the Sena Cycling App.
④
Tap Save and check that your friend (B) is paired with you (A)
correctly.
⑤
Tap Scan (
) and repeat steps 3-4 to pair with Intercom Friends
(C) and (D).
Note: The Smart Intercom Pairing (SIP) is not compatible with
Sena products that use Bluetooth 3.0 or below.
To Next Page
Loading...
