Sena SMH10 - Exiting Voice Configuration Menu; SMH10 Function Priority Order

SMH10
23
English
9.8 E[it Voice ConÀguration Menu
Voice Prompt
ő'ZKVEQPſIWTCVKQPŒ
Factory Default N/A
Execute Tap the Phone Button
To exit voice conlguration menu and get back to stand-by mode,
rotate the Jog Dial until you hear a voice prompt saying “Exit
FRQ¿JXUDWLRQ´, and tap the Phone Button to conlrm. Tapping the
Jog Dial is not available for this setting.
Rotate Jog Dial Tap Phone Button Tap Jog Dial
Speed Dial Execute N/A
VOX Phone Enable Disable
VOX Intercom Enable Disable
Voice Prompt Enable Disable
Sidetone Enable Disable
Advanced Noise Control Enable Disable
Delete All Pairings Execute N/A
Exit Conlguration Execute N/A
8QKEG%QPſIWTCVKQP/GPW$WVVQP1RGTCVKQPU
The SMH10 operates in the following order of priority
(highest) Mobile phone,
Intercom,
Stereo music by audio cable,
Music sharing by Bluetooth stereo music,
(lowest) Bluetooth stereo music
A lower priority function is always interrupted by a higher priority
function. For example, stereo music is interrupted by intercom call,
and intercom conversation is interrupted by incoming mobile phone
call.
10. FUNCTION PRIORITY