Sena Snowtalk 2 - BLUETOOTH INTERCOM; 7.1 Intercom Pairing

10
6 STEREO MUSIC
6.1 Bluetooth Stereo Music
1. To play or pause music, press and hold the (R) Button for
1 second.
2. To track forward or track back, press and hold the (+) Button or
the (-) Button for 1 second.
Note: Plug your MP3 Player directly to headset’s MP3 port using a 3.5mm stereo
audio jack cable (not included in the package). In this way, you can listen to
music even if your headset is out of battery or powered off. You can control
volume only from the MP3 player.
7 BLUETOOTH INTERCOM
7.1 Intercom Pairing
7.1.1 Pairing with Other Headsets for Intercom Conversation
The headset can be paired with up to three other headsets for
Bluetooth intercom conversation.
1. Press and hold the (R) Button of the headset A and B for
5 seconds until red LEDs of the both units start to ash rapidly.
2. Simply tap the (R) Button of any one of the two headsets A and
B, and wait until the LEDs of both headsets turn to blue and
intercom connection is automatically established.
Intercom
Friend B
Intercom
Friend C
Intercom
Friend D
YOU