Sena SPH10H - Assigning Speed Dial Numbers

SPH10H
18
The voice prompt for each menu item is as below:
(1) Speed Dial (5) Sidetone
(2) VOX phone (6) Delete all pairings
(3) VOX intercom (7) Exit conguration
(4) Voice prompt
Speed Dial
Voice promptSidetone
Exit configuration VOX phone
Delete all pairings VOX intercom
9.1 Assigning Speed Dial
Voice Prompt
“Speed dial”
Factory Default N/A
Execute Tap the Phone Button
1. To assign a phone number as a speed dial, rotate
the Jog Dial until you hear a voice prompt saying
“Speed dial”.
2. Tap the Phone Button, and you will hear a voice
prompt saying “Speed dial one” and “Phone
connected”.
3. Rotate the Jog Dial to select one of three speed
dial numbers and you hear a voice prompt saying
“Speed dial (#)”.
4. Call a phone number you want to assign and you
will hear a voice prompt saying “Save speed dial
(#)”. The phone number is automatically assigned
to the selected speed dial number. Then the phone
call will hang up before being connected.
5. To exit the menu, rotate the Jog Dial clockwise or
counter clockwise until you hear a voice prompt
saying “Cancel”, and tap the Phone Button to
confirm. You will then hear a voice prompt saying
“Cancel”. If any button is not pressed within 1
minute, the SPH10H will exit the configuration
menu and go back to stand-by mode.
Note:
1. After assigning a phone number to one of three speed
dials, you can continually assign another phone number
to the rest of two speed dials.
2. You can assign phone numbers to speed dials in your
PC. Please visit the Sena Bluetooth web site at www.
sena.com for more information.