Sena SPH10H - Four-Way Universal Intercom Case 2

SPH10H
34
2. The other SPH10H (C) may join the intercom by
making an intercom call to you (A).
(B)
(D)
(A)
(C)
3. The non-Sena Bluetooth headset (D) may join the
conference intercom by making an intercom call to
the SPH10H (C).
(B)
(D)
(A)
(C)
4. Now two SPH10H headsets (A & C) and two non-
Sena Bluetooth headsets (B & D) are connected
with the four-way Universal Intercom.
(B)
(D)
(A)
(C)
You may disconnect a four-way Universal Intercom
using the same way as you do in a normal four-way
intercom. Please refer to section 15.2, “End Four-way
Intercom”.
16.4.2 Four-way Universal Intercom Case 2
Three SPH10H headsets (A, C and D) and one non-
Sena Bluetooth headset (B). The procedure is the same
as the case 1 described in section 16.4.1.
(B)
(D)
(A)
(C)