of the battery. Insert the charger output plug into the battery
charging port.
3. Plug the charger into a power outlet. Charging should initiate
and will be indicated by the LED charge status light on the charger
turning red.
4. Once fully charged, the charging indicator light will turn green.
Unplug the charger from the power outlet first and then remove
the charger output plug from the battery charging port. Avoid
leaving the charger plugged in when the battery is fully charged.
WARNING:
1. Do not leave your battery unattended while it is charging.
2. Do not charge the battery with chargers other than the charger
provided by Senada Bikes.
3. Only charge the battery indoors in dry spaces that are not
excessively hot or cold.
4. Ensure there are no dirt, debris, or flammable items nearby
when using the charger.
5. The charger will automatically stop charging once the battery
reaches its full capacity.
6. Store the battery indoors in a dry space, away from heat or
flame sources and out of direct sunlight.
7. The charger may get hot when charging. Be careful and avoid
touching the charger while charging.
To Next Page