Safety
Helmets and Local Laws
Always wear a helmet when riding your e-bike. Ensure that the
helmet fits your head and is securely tightened. Before riding,
read local laws and comply with all rules relating to cycling and
e-biking in your area. If you attach a seat for children to the bike,
they must also be wearing a properly fitted helmet at all times.
Pre-ride Safety Check and Inspection
Before each ride, make sure to inspect your e-bike to ensure
there are no loose fasteners or accessories. Specifically, check
that both the front and rear axles are secure. Also, make sure
both the handlebar and the handlebar stem are not loose. Check
the tire pressure of both wheels before riding to ensure the tires
are inflated to the recommended pressure printed on the
sidewalls of the tires. Pull the brake levers to make sure your
brakes are working properly and adjust if necessary. Ensure both
your seat post and handlebar stem are inserted past their
minimum insertion points as indicated by the markings on them.
Riding in Wet Conditions
This electric bike can withstand light rain and small splashes but
is not designed to be subjected to inclement weather, extremely
heavy showers, or submersion in water. Use caution when riding in
wet conditions as it will take longer to use the brakes to slow
down, and also when turning as the tires may slip. The electrical
components on the bike are not waterproof. The entire bike has
an IP rating of X6. Water damage is not covered under warranty.
Riding at Night
Riding at night comes with more risks than riding during the day
due to decreased visibility, so riders are encouraged to exercise
increased caution. Before riding at night, make sure that reflectors
To Next Page