Senal PMC-II User Manual

9
Connecting to an Audio Interface or Sound Card / Mute Button / Mono Button
▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪ ▪
4. Turn the volume control knob of the PMC-II to full attenuation (all the way to the left).
5. Turn on the monitors.
6. Start playing audio on your computer and gradually turn up the volume control of the
PMC-II to the desired level.
Note: If no sound is heard, see the troubleshooting section on page 10.
Mute Button
The mute button quickly silences the sound output. To mute the sound, press the mute
button. To unmute, depress the mute button.
Mono Button
The mono button is a convenient feature for listening to your mixes in mono and check for
balance or phasing issues. To monitor your mix in mono, press the mono button. Depress the
mono button to return to monitoring in stereo.

Senal PMC-II Specifications

General

Brand	Senal
Model	PMC-II
Category	Controller
Language	English