Need help?Do you have a question about the Senco SN70 and is the answer not in the manual?
Employer must ensure compliance with safety warnings and instructions.
Read and understand safety instructions before operating the tool.
Instructions for installing nail guide and loading magazine.
Instructions for loading FramePro magazine.
Operation with Contact Actuation (Trigger Fire or Bottom-Fire).
Precise placement using Sequential trigger.
Read safety reminder for trigger operation.
How to activate the SN60MC using its rail safety mechanism.
Disconnect air, use wrench or finger to adjust depth.
Adjust depth using thumb/index finger after disconnecting air.
Disconnect air, release feeder shoe, and remove fasteners.
Release latch, open door, remove jammed fastener.
Loosen knob, pull magazine back, clear fastener.
Add no-mar pad for flat surface applications.
Rotate deflector to change direction of exhaust air.
Tool prevents activation when 6 or fewer nails remain.
Read safety manual, check safety element/trigger movement, keep screws tight.
Apply Senco pneumatic oil daily and wipe tool clean.
Addresses air leaks, sluggish operation, and poor return for SN70.
Addresses air leaks and poor return for SN60MC.
Covers general problems and advises contacting SENCO.
Details codes, lengths, and diameters for SN70 nails.
Specifications for FramePro 602/652/702XP/752XP FRH nails.
Specifications for FramePro 601/651/701XP/751XP CH nails.
Details codes, lengths, and diameters for SN60MC nails.
Operating pressure, air consumption, weight, and capacity.
Operating pressure, air consumption, weight, and capacity.
Feature for precise fastener placement.
Options for tool protection, transport, and suspension.
List of available Senco accessories like compressors, hoses, and safety gear.
Details warranty periods, exclusions, and conditions for Senco products.
Employer must ensure compliance with safety warnings and instructions.
Read and understand safety instructions before operating the tool.
Instructions for installing nail guide and loading magazine.
Instructions for loading FramePro magazine.
Operation with Contact Actuation (Trigger Fire or Bottom-Fire).
Precise placement using Sequential trigger.
Read safety reminder for trigger operation.
How to activate the SN60MC using its rail safety mechanism.
Disconnect air, use wrench or finger to adjust depth.
Adjust depth using thumb/index finger after disconnecting air.
Disconnect air, release feeder shoe, and remove fasteners.
Release latch, open door, remove jammed fastener.
Loosen knob, pull magazine back, clear fastener.
Add no-mar pad for flat surface applications.
Rotate deflector to change direction of exhaust air.
Tool prevents activation when 6 or fewer nails remain.
Read safety manual, check safety element/trigger movement, keep screws tight.
Apply Senco pneumatic oil daily and wipe tool clean.
Addresses air leaks, sluggish operation, and poor return for SN70.
Addresses air leaks and poor return for SN60MC.
Covers general problems and advises contacting SENCO.
Details codes, lengths, and diameters for SN70 nails.
Specifications for FramePro 602/652/702XP/752XP FRH nails.
Specifications for FramePro 601/651/701XP/751XP CH nails.
Details codes, lengths, and diameters for SN60MC nails.
Operating pressure, air consumption, weight, and capacity.
Operating pressure, air consumption, weight, and capacity.
Feature for precise fastener placement.
Options for tool protection, transport, and suspension.
List of available Senco accessories like compressors, hoses, and safety gear.
Details warranty periods, exclusions, and conditions for Senco products.
General| Type | Framing Nailer |
|---|---|
| Power Source | Pneumatic |
| Nail Size | 2" to 3-1/2" |
| Operating Pressure | 70 - 120 psi |
| Nail Gauge | 0.113 - 0.131" |
| Fastener Type | Nails |
To Next Page
