To Next PageTo Next Page
Need help?Do you have a question about the Senco SLP20XP and is the answer not in the manual?
Outlines employer's duties regarding safety compliance, manual availability, and user understanding.
Prior to using the tool, it is essential to read and understand the accompanying "SAFETY INSTRUCTIONS" manual.
Load fasteners, push rail, position contact, and pull trigger to operate the tool.
Disconnect air, open rail, and remove fasteners to clear a jam.
Keep tool pointed away during air connection and read safety manual before maintenance.
Perform daily inspections, keep screws tight, and note that routine lubrication is not needed.
Clean the tool daily and inspect for wear, using cleaning solutions sparingly.
Information on SENCO's accessory line and how to obtain a catalog.
WARNING: Repairs require trained personnel; always read safety manual before troubleshooting.
Addresses common issues like air leaks, sluggish operation, poor return, and other problems.
Details operating pressure, air consumption, speed, weight, and fastener capacity.
Provides tool dimensions (height, length, width) and a list of fastener codes with their sizes.
Details warranty periods, claim procedures, and specific exclusions for SENCO products.
Covers general warranty conditions, disclaimers, and limitations of liability.
Outlines tool replacement for natural disasters and the 30-day customer satisfaction return policy.
Outlines employer's duties regarding safety compliance, manual availability, and user understanding.
Prior to using the tool, it is essential to read and understand the accompanying "SAFETY INSTRUCTIONS" manual.
Load fasteners, push rail, position contact, and pull trigger to operate the tool.
Disconnect air, open rail, and remove fasteners to clear a jam.
Keep tool pointed away during air connection and read safety manual before maintenance.
Perform daily inspections, keep screws tight, and note that routine lubrication is not needed.
Clean the tool daily and inspect for wear, using cleaning solutions sparingly.
Information on SENCO's accessory line and how to obtain a catalog.
WARNING: Repairs require trained personnel; always read safety manual before troubleshooting.
Addresses common issues like air leaks, sluggish operation, poor return, and other problems.
Details operating pressure, air consumption, speed, weight, and fastener capacity.
Provides tool dimensions (height, length, width) and a list of fastener codes with their sizes.
Details warranty periods, claim procedures, and specific exclusions for SENCO products.
Covers general warranty conditions, disclaimers, and limitations of liability.
Outlines tool replacement for natural disasters and the 30-day customer satisfaction return policy.
General| Fastener Type | 18 Gauge Brads |
|---|---|
| Operating Pressure | 70 - 120 psi |
| Weight | 2.7 lbs |
| Magazine Capacity | 110 |
| Width | 2.5" |
| Gauge | 18 |
| Nail Shank | Smooth |
| Height | 9.5" |
| Length | 9.75" |
| Nail Diameter | 18 Gauge |
| Fastener Length | 5/8" to 1-5/8" |
| Fastener Range | 5/8" - 1-5/8" |
