To Next PageTo Next Page
Need help?Do you have a question about the Senco SNS40 and is the answer not in the manual?
General| Power Source | Pneumatic |
|---|---|
| Magazine Capacity | 100 staples |
| Fastener Type | Staples |
| Operating Pressure | 70-120 psi |
| Air Inlet | 1/4" NPT |
| Fastener Range | 1/4" to 1/2" |
General instructions for operating the heavy staplers.
Visual identification of various stapler models (SC1, SC2, SPS, SNS40, SNS41, PW150, M2/M3).
Read safety warnings before operating the tool.
Instructions for loading staples into SPS and SNS40/41 models.
Safety instructions for tool operation in French.
Loading and feeder shoe operation instructions in French.
Read safety warnings before operating the tool in Danish.
Loading and feeder shoe operation instructions in Danish.
Operating instructions for SC2 and M2/M3 stapler models.
Operating instructions for SNS40/41 and safety yoke adjustment.
Detailed loading and operation for SC2/M2/M3 staplers.
Operation and safety features for SNS40/41 staplers.
Instructions for loading staples into various stapler models.
Details on safety mechanisms and depth control.
Conditions where contact actuation is not advised.
Adjusting the deflector and clearing jammed fasteners.
Restrictions on using contact actuation in French.
Sequential actuation operation and deflector adjustment in French.
Restrictions for contact actuation and sequential actuation in Danish.
Deflector rotation and jam clearing instructions in Danish.
How to open the E-Z Clear latch and clear jams using a screwdriver.
Reconnecting air supply and reloading staples for various models.
Instructions for opening the E-Z Clear latch and removing jams.
Steps to reconnect air supply and reload the magazine.
Opening the latch, clearing jams, and reconnecting air supply.
Read safety warnings before performing maintenance.
Tighten screws, daily inspections, lubrication, and cleaning.
Safety, screw tightness, daily inspection, lubrication, and cleaning.
Safety, screw tightness, daily inspection, lubrication, and cleaning.
Diagnosing air leaks, sluggish operation, and poor return for SPS/SNS40.
Diagnosing driver, feed, jamming, and other issues for SNS41/SC2/M2/M3.
Diagnosing air leaks, sluggishness, and return issues in French.
Diagnosing driver, feed, jamming, and other problems in French.
Diagnosing leaks, operation, and driver issues in Swedish.
Diagnosing feed problems, jamming, and other issues in Swedish.
Technical data for SPS, PW150, PW150R, PW200, and MW models.
Technical data for SNS40 and SNS41 stapler models.
Detailed technical data for multiple stapler models in English.
Detailed technical data for the SC2 stapler model in English.
Technical data for multiple stapler models in French.
Technical data for the SC2 stapler model in French.
Technical data for multiple stapler models in Swedish.
Technical data for the SC2 stapler model in Swedish.
LpA and LwA noise values for different stapler models.
Vibration characteristic values for different stapler models.
Acoustic characteristics and noise levels in French.
Vibratory characteristics for stapler models in French.
Noise characteristics and work environment considerations.
Vibration values and their relation to the tool in Norwegian.
Noise characteristic values and their interpretation in Italian.
Vibration characteristics and their relation to the tool in Italian.
Overview of available accessories for SENCO tools.
Statement of product conformity with standards and directives.
