EN - 10
TURNING OFF BT SPEAKER NOTIFICATIONS AND
ALERTS
The BT speaker offers the option to turn the notification tones off or on. Press
and hold the “- “ and “+” buttons together to activate or deactivate the BT speaker
notification and alert tones. When turned off and on, the BT speaker will remember
the last selected mode.
Caution: in the off state, no tones will indicate the status of the BT speaker. Charge
the BT speaker as a preventive measure. Avoid using the sound at a maximum level.
USB-A AND MEMORY CARD PLAYBACK
Insert the memory card with the contacts facing the USB-A connector. After inserting
the memory card or USB-A memory storage, the BT speaker will automatically start
playing the content. If there is no file to play on the memory storage, the BT speaker
will switch to Bluetooth mode. To remove the memory card, gently press it into the BT
speaker using your fingernail or a blunt object to release it from the slot. Then, you
can carefully remove it with your fingernails (or with tweezers). Supported playback
formats are listed in the technical specification.
Caution: Due to the variety of devices on the market, compatibility and playback
support for all media are not guaranteed. The memory devices you want to connect
should be tested in advance and/or formatted as FAT32. The playback of protected
media, files or content stored inside them may fail.
To Next Page
Loading...
