EasyManua.ls Logo

Sencor NYX 2 - Maintenance

Sencor NYX 2
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN - 3
Faults Requiring Repair
If any of the following problems occurs, please disconnect power to the unit and
contact a qualified service technician.
A. Power cord or plug is damaged.
B. Liquids or other foreign objects have penetrated inside the product.
C. If the unit does not work even if it’s being operated according to the instructions,
don’t press any buttons other than those described in these instructions.
Otherwise, damage to this unit may occur along with a more demanding repair.
D. This unit has fallen on the ground from a big height.
E. Burns can be smelled from the product inside.
Maintenance
If you don’t have enough technical knowledge necessary to maintain this unit, don’t
attempt to repair it by yourself. By removing the cover, you are exposed to a risk of
electric shock. If needed, please contact a qualified service technician.
Replacement of Parts
If you need to replace any part of this unit, ask your service technician to make a
replacement for equal spare part models. If other spare part models are used for
replacement, serious damage, electric shock or shortening the unit’s lifetime may
occur.
Safety Check
After completing maintenance, ask the service technician to perform an on-site safety
check to ensure that the unit is operating safely.
Note:
Before using this product, read these instructions carefully and keep it well for
future use.

Related product manuals