- 4 - Copyright © 2019, Fast ČR, a.s. 09/2019
Warning:
Do not open the lid of the water tank during the coffee brewing
process. Do not touch the hot surface of the hotplate or the glass
kettle. This could cause burns. Use the handle for lifting and carrying.
■
Pay extra attention when handling the kettle filled with hot liquid to prevent
scalding.
■ Do not submerge aheated kettle in ice-cold water. Do not leave an empty
kettle sitting on the hotplate when it is turned on. This could damage it.
■ Regularly inspect the water level in the water tank when using the appliance.
When the water level falls below the minimum water level mark, add water. Before
adding water, first turn the appliance off and disconnect it from the power socket.
■ Before using the appliance again, turn it off and allow it to cool down for
10minutes.
■ The appliance is equipped with asafety thermal fuse that automatically cuts off
the electrical circuit when overheating occurs. In the event that such asituation
occurs, disconnect the appliance from the power socket and allow it to cool down.
After it has cooled down, you may continue using the appliance. Do not fill the
water tank with cold water for the purpose of cooling down the heating element.
■
Always turn off the appliance and disconnect it from the power socket when
not using it, when leaving it without supervision, before disassembling
or assembling it, before filling up the water tank, and before moving or
cleaning it. Allow the appliance to cool down before cleaning or moving it.
■
Keep the appliance and its accessories in clean condition. Clean and maintain it
according to the instructions in chapter Cleaning and maintenance. Never wash
the appliance under running water or submerge it in water or another liquid.
■
Never move the appliance with the water tank filled with water or with the
kettle located on the hotplate.
■
Make sure that the power cord does not come into contact with ahot
surface and prevent the power plug from coming into contact with water.
■ Disconnect the appliance from the power socket by pulling on the plug,
never pulling on the power cord. Otherwise, this could damage the power
cord or the socket.
■ To avoid the danger of injury by electrical shock, do not repair the appliance
yourself or make any adjustments to it. Have all repairs or adjustments performed
at an authorised service centre. By tampering with the appliance, you risk voiding
your legal rights arising from unsatisfactory performance or quality warranty.
To Next Page
Loading...
