EN - 4
POWER SOURCE
This unit is designed to be operated on AC/DC.
AC OPERATION
Plug the tail of AC power cord into AC socket on unit and the plug into household AC outlet. The
batteries will be automatically disconnected. For dual voltage version, make sure that the AC VOLTAGE
SELECTOR is switched to your local voltage.
DC OPERATION
Open the BATTERY COMPARTMENT DOOR. Install 8pcs UM-1/D size batteries (not included) into
compartment. Please follow correct polarities as indicated.
CAUTION:
Remove batteries if they are fl at or not being used for a long period of time.
Batteries contain chemical substances, so they should be disposed of properly.
BASIC FUNCTION
Switching On The Unit
After connecting the power, the display will show AM 0:00. Remain this mode,the unit would turn
of automatically after 15 minutes. Press STANDBY button to turn on the unit and press STANDBY
button again to play.
REMARK:
The product maybe reset or not reset to operation of control due to electrostatic discharte, just switch
off and reconnect again.
Setting the Time
Note: Please make sure that all connections have been ready.
1. In standby mode the LCD display will fl ash 0:00. Press the SET/PAIR/ID3 button, the display will
show the RTC 12 hours or the RTC 24 hours version. Press SKIP UP /DOWN button
on unit or on remote to choose for the 12 or 24 hour version. Press the SET/PAIR/ID3 button to
confi rm.
2. After confi rm the hours system, the Hour digits will fl ash, press the or button on unit
or on remote repeatedly to set the clock to the correct Hour, press the SET/PAIR/ID3 button
to confi rm. Then the minute digits will fl ash, press the or button on unit on remote
repeatedly to set the clock to the correct Minutes, press the SET/PAIR/ID3 button again to confirm.
Waking up the music (RADIO/CD/USB)
You can set the timer to wake up the Radio, CD/MP3 or USB.
1. After setting the time in standby mode, press and hold the TIMER button on unit or press TIMER
key on remote control to set the desired wake up time.
2. Enter the desired hour with the or button, press the TIMER button on unit or on remote
control to confi rm. Enter the desired minutes with the or button, press the TIMER
button on unit or on remote control to confi rm. Then choose the desired wake up mode (RADIO/
CD/USB) by or button and press TIMER button on unit or on remote control to confi rm.
3. To the pre-set time, the desired wake up mode will turn on automatically.
To Next Page
Loading...