EN-8
EN
Vacuum Cleaner 2 in 1 (bag & bagless)
SVC 900
Copyright © 2019, Fast ČR, a.s. Revision 08/2019
Changing the dust bag
If while the suction hose is lifted above the vacuumed area and the power is set to maximum and the indicator
seen through the clear window shows "full" (full colour in the indicator) then it is necessary to replace the dust bag:
1) Open the vacuum cleaner cover.
2) Remove the old dust bag.
3) Insert a new one in the same position.
4) Close the vacuum cleaner cover.
Caution:
Never attempt to wash paper bags as they are single use only and once full are to be disposed of
together with household waste. It is only possible to wash textile bags!
Emptying the dust container
1) Disconnect the hose from the vacuum cleaner.
2) Open the vacuum cleaner cover and remove the dust container by pulling it up with its handle.
3) Place the dust container above a waste bin.
4) Press the safety lock and open the bottom lid of the container.
5) Dust and dirt may be put in regular household waste.
6) Then by turning remove the H.E.P.A. lter from the container and tip out the remaining dust and dirt.
7) Insert the H.E.P.A. lter back into the container and turn it to lock it into position.
8) Close the bottom lid of the container. Make sure the safety lock button is engaged.
9) Place the dust container back into the vacuum cleaner.
Tip:
We recommend washing the dust container and the dust lter under running, lukewarm water.
Caution:
Before installing the dust container and the dust lter back into your appliance, make sure that
both the container and the lter are completely dry.
To Next Page
Loading...
