To Next PageTo Next PageWhy is the suction weak on my Sencor SVC 45BK Vacuum Cleaner?
If the suction output of your Sencor Vacuum Cleaner is weak, it could be due to several reasons. First, check if the dust bag is completely full and replace it if necessary. Another possible cause is a blockage in the vacuum cleaner; remove any obstructions or foreign objects. Lastly, a clogged filter can also reduce suction, so ensure you clean the filter.
What to do if my Sencor SVC 45BK motor will not start?
If the motor of your Sencor Vacuum Cleaner won't start, there are a few things you can check. Ensure the power cord is firmly plugged into the wall power outlet. Inspect the wall power socket to make sure it is not damaged. Also, verify that the vacuum cleaner is switched on.
How to fix a Sencor SVC 45BK when the power cord won't wind in?
If the power cord of your Sencor Vacuum Cleaner is not winding in completely, it might have slipped down from the winding pulley during winding. To resolve this, hold the cable under tension while winding it.
What to do if the Sencor SVC 45BK cover cannot be closed?
If you cannot close the cover of your Sencor Vacuum Cleaner, the dust bag may not be inserted correctly. Check its position in the plastic holder, or try inserting a new bag to ensure it fits properly.
What to do if the cable of my Sencor SVC 45BK cannot be pulled out?
If the cable of your Sencor Vacuum Cleaner cannot be pulled out, the cable may be wound up incorrectly. Press the winding button and try to rewind the power cord again.
What to do if the power cord of my Sencor Vacuum Cleaner cannot be pulled out?
If the cable of your Sencor Vacuum Cleaner is wound up incorrectly and cannot be pulled out, press the winding button of the self winding cable and try to rewind the power cord again.
How to fix Sencor Vacuum Cleaner power cord not winding completely?
If the power cord of your Sencor Vacuum Cleaner is not winding in completely, it may have slipped down from the winding pulley during winding. Hold the cable under tension while winding the cable.
What to do if the power cord of my Sencor Vacuum Cleaner starts to wind in when it is not required?
If the power cord of your Sencor Vacuum Cleaner starts to wind in when it is not required, the winding mechanism is damaged. Have the vacuum cleaner repaired only by a qualified technician.
What to do if the output control of my Sencor Vacuum Cleaner does not function?
If the output control of your Sencor Vacuum Cleaner does not function, the vacuum cleaner is out of order. Have the vacuum cleaner repaired only by a qualified technician.
Why the Sencor Vacuum Cleaner cover cannot be closed?
If the cover of your Sencor Vacuum Cleaner cannot be closed, the dust bag is not inserted, or is inserted incorrectly. Check the position of the dust bag in the plastic holder, or insert a new bag.
Steps to connect the hose, tube, and floor nozzle.
How to plug the vacuum cleaner into the electrical grid.
Adjusting nozzle, suction, and turning on/off.
Using accessories and temporarily pausing the vacuum.
Switching off and winding the power cord.
Steps to replace the dust bag when full.
How to change the inflow and outflow filters.
Details on energy efficiency, dust emission, and noise level.
List of items included with the vacuum cleaner.
Instructions for disposing of packaging materials.
Guidelines for recycling used electrical equipment.
General| Power | 700 W |
|---|---|
| Dust Container Volume | 1.5 L |
| Cord Length | 5 m |
| Filtration | HEPA Filter |
| Model | SVC 45BK |
| Category | Vacuum Cleaner |
| Color | Black |
| Type | Cylinder |
| Power Source | Electric |
