PT300D QuickStart Guide
Part Number BFA10083 - Verizon
DPB00007 -- 1 --
Welcome
Thanks for choosing the Sendum PT300D
as your Package Tracking solution! The
purpose of this Quick Start Guide is to help
you get your system up and running as
quickly as possible.
Introduction
Your PT300D device (model BFA10083) has
been configured for use with Verizon wireless
service.
Step 1: Get Familiar
PT300D Trackers come in many different
varieties and configurations. Depending on
what you ordered, you may have some, or all,
of the components listed in “Figure 1 - PT300D
Component List”.
To get started working with your new PT300D,
at a minimum you will need the PT300D
Command Module complete with one of the
following:
• a Basic Sensor Pack with the AC Adapter
and Data Cable
• an Advanced Sensor Pack with the AC
Adapter and Data Cable, OR
• the Accessory Pack, complete with the 10k
mAh Battery Pack and Battery Charger
PT300D
Command Module
AC Adapter
P/N: BFA10069
Data Cable
P/N: MCA10017
Accessory Pack
P/N: BFA10077
P/N: BFA10095
Battery Charger
for 10k mAh Battery
P/N: BFA10179
10k mAh
Battery Pack
Advanced Sensor Pack
P/N: BFA10063
Basic Sensor Pack
P/N: BFA10062
Figure 1 - PT300D Component List
To Next Page
Need help?
General