Sendum PT300 User Manual

PT300 QuickStart Guide
Part Number BFA10068 (for Verizon)
-- 1 --
Welcome
Thanks for choosing the Sendum PT300 as
your Package Tracking solution!
The purpose of this Quick Start Guide is to
help you get your system up and running
as quickly as possible.
Your PT300 device (model BFA10068) has
been configured for use with the Verizon
wireless service.
Step 1: Get Familiar
PT300 Trackers come in many different
varieties and configurations. Depending on
what you ordered, you may have some, or all,
of the components listed in “Figure 1 - PT300
Component List”.
To get started working with your new PT300,
at a minimum you will need the PT300
Command Module complete with one of the
following:
• a Basic Sensor Pack with the AC Adapter
and Data Cable
• an Advanced Sensor Pack with the AC
Adapter and Data Cable, OR
• the Accessory Pack, complete with an
external power source such as the 10K
mAh Battery Pack (and Battery Charger)
PT300
Command Module
AC Adapter
P/N: BFA10069
USB to
mini-USB
Cable
P/N: MCA10017
Accessory Pack
P/N: BFA10077
P/N: BFA10095
Battery Charger
for 10k mAh Battery
P/N: BFA10179
10k mAh
Battery Pack
Advanced Sensor Pack
P/N: BFA10063
Basic Sensor Pack
P/N: BFA10062
Figure 1 - PT300 Component List

Sendum PT300 Specifications

General

Brand	Sendum
Model	PT300
Category	GPS
Language	English

Summary

Step 1: Get Familiar

PT300 Component List

Lists various PT300 components like Command Module, Sensor Packs, and Accessory Pack.

Step 2: Charging

Charging Sensor Packs

Connects the Sensor Pack or Advanced Sensor Pack to the AC Adapter for charging.

Charging Accessory Pack Battery

Connects the 10K mAh Battery Pack to the AC Adapter for charging.

Step 3: Airtime Account

Device Identifier Explained

Explains the Device Identifier (serial number) and its location on the PT300 Command Module.

Step 4: Provision

Provisioning Process for Verizon

Details the one-time process of linking the PT300 with Verizon network and Sendum software.

Step 5 - Web Access

Accessing the Findum Portal

Instructions on accessing the Sendum web portal (Findum) and logging in.

Step 6 - Configure

Device Configuration in Findum

Explains how to configure device settings like Assisted Location and Sensor Reports.

Step 7 - View your Data

Appendix: Turning on your PT300

Connecting the Command Module

Details how to physically connect the PT300 Command Module to Sensor or Accessory Packs.

Ensuring a Secure Connection

Emphasizes ensuring a solid connection and hearing a "Click" sound when connecting packs.

2. Turning off your PT300

Unplugging the Command Module

Instructions on how to turn off the PT300 by unplugging the Command Module.

3. LED Lights and Status Button

4. LED Light Indications