Senect XT1 User Manual

Maintenance and cleaning
14
6. If the calibration worked select „Save calibration“.
7. Rinse the electrode with tab water again.
Your SENECT ORP Sensor XT1 is not ready to be used.
Fig. 1: Calibration curve with two calibration point.
Tipp: It is also possible to load old calibrations. There you can
also see the calibration coefficients.
The calibration should be carried out at the same
temperature like in the measured water.

Senect XT1 Specifications

General

Brand	Senect
Model	XT1
Category	Accessories
Language	English