Do you have a question about the SENKO MGT and is the answer not in the manual?
Brand | SENKO |
---|---|
Model | MGT |
Category | Gas Detectors |
Language | English |
Instructions for powering on the MGT portable multi-gas detector using the KEY button.
Instructions for powering off the MGT portable multi-gas detector using the KEY button.
Details on how the device displays gas concentrations and battery power in normal operation.
How to cycle through various display modes by pressing the KEY button.
Explanation of each LCD display image and its corresponding meaning during operation.
Describes alarm types (LOW, HIGH, TWA, STEL), set-off conditions, and display/sound/vibration alerts.
Procedure to reset minimum and maximum detected gas concentration values.
How to view and set the alarm set-off values for LOW, HIGH, TWA, and STEL alarms.
Lists the initial concentration levels for LOW, HIGH, TWA, and STEL alarms for various gases.
Instructions on how to set and synchronize the device's current date and time.
Procedure to initiate and understand the results of the device's self-diagnostic test.
Step-by-step guide for performing zero calibration using fresh air.
Instructions for performing span calibration using standard calibration gases.