SENKO MGT - Detailed Display Mode Explanations

MGT User Manual
7
3.2.1 Display Mode in Detail
LCD Display Images
Description in Detail
 Measuring Mode (Basic Display)
 Display the current gas levels of the atmosphere and the battery power
level
 A minimum gas concentration detected by the device.
*In an ambient air, the Oxygen level normally indicates 20.9%vol.
 A maximum concentration detected by the device.
*In an ambient air, the Oxygen level normally indicates 20.9%vol.
 Acceptable hourly average exposure levels of the toxic gases for the
last eight hours (Time Weight Average)
 Acceptable average exposure levels of the toxic gases for the last 15
minutes (Short Term Exposure Limit)
 Clear the previous Low, High (Peak), TWA, STEL values.
 Check the current setting values manually.
(Low alarm, High alarm, TWA, STEL)
 Check the firmware version and type (N type or P type)
 Check on set SPAN calibration levels
 Mode for ZERO calibration and SPAN calibration
 Current Date and Time