Fireplace stove SENKO SP 5
1.1. FUEL
It is not recommended to use damp and low-calorie wood. The wood
must have a moisture content of less than 17%. Wet wood has a very low
output of approx. 2.3 kWh/kg and heavily pollutes the door glass, also
pollutes the chimney and replace stove.
Use only recommended fuel:
wood: white beech, hornbeam, oak, acacia
air-dried min. 2 years
relative humidity 15 - 17 %, eect approx. 4.2 kWh/kg
wooden briquettes: eect approx. 4.4 kWh/kg
1.2. HEATING
manually as needed
we recommend that the logs have a cross-section of 50 x 50 mm
and a length of up to 2/3 of the length of the combustion chamber
door
for a more intense re, use smaller logs, while to maintain the re,
the logs must be more massive
the minimum distance between logs must be 1 cm, as well as the
minimum distance between briquettes
when inserting fuel into the combustion chamber, it is necessary to
use protective heat-insulated gloves
protective heat-insulated gloves must also be used when opening
and closing the combustion chamber door
To Next Page
Loading...
