Need help?Do you have a question about the Sennheiser 300 series and is the answer not in the manual?
General| Operating Time | Up to 8 hours |
|---|---|
| Polar Pattern | Cardioid |
| Type | Wireless |
| Modulation | FM |
| Power Supply | 2 x AA batteries (transmitter) |
| Connector | XLR |
Guides on connecting XLR and jack cables for audio output.
Instructions for connecting rod antennas to the receiver's antenna inputs.
Guide on how to insert and remove AA batteries or the BA 2015 rechargeable battery.
Instructions for connecting lavalier and headset microphones to the bodypack transmitter.
Guides on connecting instruments or audio sources via specific cables.
Details how to connect and disconnect the ASA 214 to the power supply unit.
Guides on connecting compatible Sennheiser receivers to the antenna splitter.
Instructions for connecting antennas and antenna amplifiers to the ASA 214.
Outlines options for connecting multiple receivers or systems.
Details configuration for using two antennas to supply a 4-channel system.
Highlights potential risks and necessary precautions for rack mounting.
Identifies and describes the controls and indicators on the front of the receiver.
Guides on powering the receiver on, switching to standby, and completely off.
Instructions on how to mute and unmute the receiver's audio output signal.
Explains the function of buttons used for navigating the receiver's operating menu.
Details the information shown in the standard receiver parameters display.
Instructions for scanning and selecting unused frequencies for setup.
Steps for automatically setting frequencies for multiple radio links simultaneously.
To Next Page
